Elcometer E130-S - Technical Specification; Spares & Accessories

17 TECHNICAL SPECIFICATION
Model S
Model T
Measurement
Range
0 - 25μg/cm²
0 - 50μg/cm²; 0 - 500mg/m²
0 - 6000μS/cm; 0 - 6mS/cm
0 - 3000ppm; 0 - 0.3% Salinity
Resolution
0.1μg/cm²
0.1μg/cm²; 1mg/m²
1μS/cm; 0.001mS/cm
1ppm; 0.0001% Salinity
Accuracy
±1% of the reading plus ±1 digit
(0.1μg/cm² or equivalent in other units)
Sample Size &
Time
110mm (4.3") diameter circle, or part of; 2 minutes
(maximum 3 minutes)
Operating Range
5 to 50°C (41 to 122°F)
Power Supply
4 x AA dry cell batteries (rechargeable batteries can also be
used) or USB
Battery Life
Approximately 4,000 measurements
Dimensions
250 x 145 x 50mm (9.8 x 5.7 x 1.9")
Weight
780g (1.72lb)
18 SPARES & ACCESSORIES
Description
Part Number
Calibration Verification Tiles, Set of 3
T13023980
Bottle of Pure Water, 250ml / 8.5fl oz
T99911344
Syringes, x3, 2.5ml / 0.08fl oz
T13024091
High Purity Test Papers, Box of 100
T13024094
Sensor Wipes, Box of 72
T13024087
Disposable Vinyl Gloves, Box of 20
T13024092
Plastic Tweezers, x2
T13024098
Self Seal Polythene Bags, Box of 20
T13024093
We recommend that the Elcometer 130 is used with the filter papers supplied by Elcometer as
alternative papers may result in variances in the measurement results.
en
R
www.elcometer.com 58