Elcometer E130-S - Page 36

Select the appropriate
connection method for the
gauge
Elcometer 130 Model S has USB
data output, the Model T has both
USB and Bluetooth data output.
Users can purchase a USB
B l u e t o o t h A d a p t o r f r o m
Elcometer (Part number
T99920130) which will provide a
Bluetooth solution to computers
without internal bluetooth fitted.
If ElcoMaster™ 2.0 is installed
onto a computer without
Bluetooth capability, however,
the Bluetooth tab is greyed out
(as displayed in top image).
Select the appropriate
connection method
Switch on the Elcometer 130
Connect the USB cable or
make sure that Bluetooth is
switched on in the gauge via
Menu/Bluetooth/Enable
Bluetooth (T)
Bluetooth users should return
their gauge to the main
reading screen before
continuing
Press ‘Next >’
After a screen prompt
ElcoMaster™ 2.0 will search
for and list all Elcometer 130
gauges.
R
en
www.elcometer.com
35