elddis Aspire - Filling Fresh Water Tank; Toilet Control Panel

9-30
HOW TO USE YOUR MOTORHOME’S EQUIPMENT
Fig 3
Fig 4
Fig 5
Note: Ensure that the tank can be smoothly
inserted. Do not use force!
7. The cassette tank locks shut
automatically when inserted. But check
that the cassette tank is firmly attached.
8. Close and lock the service door.
Filling fresh water tank
Fill the fresh water tank via the filling piece on
the outside of the vehicle (fig 6). The quantity
depends on the tank used (on-board tank or
integrated toilet tank, option).
Control panel
1 = “Flush” button
2 = “Cassette tank removed” display
3 = “Fill fresh water tank” display•
4 = “Cassette tank 3/4 full” display
5 = “Cassette tank full” display
* not connected as a rule when using the on-board
tank
.
Fig 7
Fig 6
4. Place the cassette tank in an upright
position and turn the pour out spout
upwards by approximately 90 deg (fig 3).
CAUTION: Avoid turning the spout by more
than 90 deg. as it may otherwise come loose
(fig 4).
5. Fill a small amount of sanitary additive
into the cassette tank via the spout.
6. Put the cassette back in and push it in
until it stops.