SoilTest PRO Auto Soils Consolidator (ASC)
25-0500
Original Instructions 17 9901X0275 Issue 2
Display Units
The display units selected define the units in which the measurement parameters are
displayed, and which units are used for sample dimensions, sample weight and sample
density. The following table shows the available section.
Units Load Dimensions Weight Density Stress
SI kN mm g kg/m³ kPa
US/Imperial lbf inch lb lbf/ft³ psi
Metric kgf cm g g/cm³ kgs/cm
2
The default setting for the display units is S.I. To change this press Set Units and select the
required units.
Display Version
The Display Version will show the current version of the firmware running.
To Next Page
Loading...