6
Cool
1. Press the MODE button until the COOL indicator appears.
2. Set the desired temperature.
3.
Use the FAN button
to set the fan speed.
Heat
1. Press the MODE button until the HEAT indicator appears
2. Set the desired temperature.
3. Use the FAN button to set the fan speed.
Fan mode
1. Press MODE
button until the FAN indicator appears.
2. The temperature settings will not control fan operation
3. Use the FAN button to set the fan speed.
Dehumidify
1. Press the MODE
button until the dehumidify indicator appears.
2. The FAN button does not work in dehumidify mode. The fan speed will always be low in
this mode. Also temperature cannot be adjusted in dehumidifying mode
Auto mode
1. Press the MODE button until the AUTO indicator appears.
2. The difference between set temperature and room temperature
determines how the air conditioner operates: cool, heat, fan or dry. The up and down
buttons will not work.
3. Use the FAN button to set the fan speed.
Timer off function (while air conditioner is on)
1. Press the MODE button until the symbol appears for the operation you want.
2. Set the desired temperature.
3. Use the FAN button to set the fan speed.
4. Press the timer off button to set the time. Use the up and down button to
choose from 1-24 hours timer setting. Once the time you have set has elapsed, the
appliance will switch itself off. To cancel the timer off function before the set time has
elapsed, press the timer off button again.
Timer on function (while air conditioner is in standby)
1. The appliance is switched off in standby mode
2. Press the TIMER button to set the time. Use the up and down button to choose from 1-24
hours timer setting. Set the desired operation, temperature, fan speed, etc. Once the set
time has elapsed, the appliance will switch itself on. To turn off the timer on function before
the set time has elapsed, press the timer on button again.
Sleep mode
1. Press the SLEEP button
2. Set the desired temperature.
3. Press the SLEEP button; SLEEP indicator will appear on the display.
Cancel the sleep mode by pressing this button again.
4. The fan speed is low in sleep mode.
Turbo
1. Press the MODE button until the fan symbol appears.
2. Set the desired temperature.
3. Use the FAN button to set the fan speed
4. Press the TURBO button. The fan and compressor will run at maximum
speed for 15 minutes, then at previously set speeds.
IMPORTANT
To Next Page
Loading...
