5
REMOTE CONTROL
The remote control has a range of up to 8m. Point the remote control at the receiver in the
interior unit. A beep confirms that the remote control signal has been received.
NOTE: LAMP button and CLEAN button may not available in every models
REMOTE OPERATION
Turn the appliance on with the ON/OFF button. This activates the most recent used setting.
The ON/OFF
button turns the air con off.
TEMPERATURE
The desired temperature is set with the up and/or down button, within the limits of the
thermostat: 16°C – 32°C .
Use the FAN SPEED button to set the fan speed at low, medium and high; or automatic (the
symbol on the display will flash). The fan speed in the automatic setting is determined by the
difference between the set temperature and the room temperature.
To Next Page
Loading...
