ElectrIQ eiQ-C22EW - Cleaning and Maintenance; Dust bin and filter cleaning; Deep Cleaning

15
CLEANING AND MAINTENANCE
1. Make sure the unit is unplugged before performing any cleaning operation.
2. Before first use and continuing after each use, wipe the unit with a damp cloth and dry thoroughly.
3. Clean all the brushes and empty the rubbish container. Vacuum or wipe the inside of the container
with a cleaning wipe.
4. DO NOT immerse the robot or the power supply in any liquid.
5. Reassemble the unit following the instructions and charge it before the next use.
6. Store the robot in a cool and dry place.
Dust bin and filter cleaning
Basic Cleaning
1. Remove the dust bin
2. Remove the debris filter
3. Empty all dust from the dust bin
4.Use the supplied brush to clean out the dust
filter and the debris filter
Deep Cleaning
1. Carefully separate the dust compartment from the robot body.
2. Gently wash the dust compartment and debris filter.