How to fix ElectrIQ Air Conditioner remote not selecting heating mode?
To resolve the issue of the remote not selecting heating mode on your ElectrIQ Air Conditioner, remove the batteries from the remote and follow the setup guide.
Why is my ElectrIQ iQool-2MS9K9K Air Conditioner airflow insufficient?
If your ElectrIQ Air Conditioner is not providing sufficient airflow, whether hot or cold, several factors could be the cause: * The temperature setting may be inappropriate. * The air inlet or outlet of either the indoor or outdoor unit might be blocked. * The air filter could be clogged. * The fan speed might be set too low. * There could be other heat sources in the room. * The unit might be low on refrigerant.
Why is the display off on my ElectrIQ iQool-2MS9K9K?
If your ElectrIQ Air Conditioner's display is off, it could be due to the following reasons: * The LED function might be active. * There may be a power failure.
Why my ElectrIQ iQool-2MS9K9K Air Conditioner does not operate?
If your ElectrIQ Air Conditioner is not operating, it could be due to: * A power failure. * A damaged indoor/outdoor unit fan motor. * A faulty compressor thermomagnetic circuit breaker. * Faulty protective devices or fuses. * Loose connections. * Self-protection activation due to adverse conditions. * Voltage outside the acceptable range. * An active TIMER-ON function. * A damaged electronic control board.
Why does my ElectrIQ Air Conditioner have a strange odor?
A strange odor from your ElectrIQ Air Conditioner could be due to a dirty air filter.
What is the noise of running water in ElectrIQ Air Conditioner?
The noise of running water in your ElectrIQ Air Conditioner is due to the back flow of liquid in the refrigerant circulation.
Instructions on downloading the required mobile application.
Steps to activate the mobile application for the first time.
Overview of the available connection modes (CF and AP).
Detailed instructions for connecting via the Quick Connection (CF) mode.
Detailed instructions for connecting via the Access Point (AP) mode.
Step-by-step guide to add the air conditioner to the app.
Crucial safety precautions and requirements for installation personnel.
Visual guide showing required clearances around the indoor and outdoor units.
Guidance on moving and securing the outdoor unit during installation.
Procedure for removing air and moisture from the refrigerant circuit.
Guidelines for adding refrigerant based on pipe length.
How to check for refrigerant leaks after installation.
Explains error codes displayed on the indoor unit.
Interpreting fault codes indicated by the outdoor unit's LED.
Common issues and solutions for Wi-Fi connectivity problems.
General| Type | Split Air Conditioner |
|---|---|
| Cooling Capacity | 2.6 kW |
| Heating Seasonal Performance Factor (HSPF) | 4.0 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Weight (Indoor Unit) | 8 kg |
| Dimensions (Outdoor Unit) | 700 x 245 x 540 mm |
To Next Page