Eliminator Monitor
Eliminator Monitor
3
Architects’ and Engineers’
Specifications
The loudspeaker shall be a compact vented-
box type. The low frequencies shall be re-
produced with one 300-watt (ANSI/EIA RS-
426-A 1980) DL15BFH 381-mm (15-in.)
vented woofer, and a DH2010A high-fre-
quency compression driver mounted on a
80° x 55° constant-directivity horn. The sys-
tem will reproduce the frequencies from
77 to 20,000 Hz. The system shall be capable
of producing average sound levels in excess of
124 dB in the long term, and short-term peaks
of 130 dB.
The enclosure shall be constructed of black,
carpeted, Road-Wood™. The dimensions
shall be 645 mm (25.39 in.) wide, 406 mm
(15.98 in.) high, and 471 mm (18.53 in.) deep. The
system shall weigh 19.5 kg (43 lb). Two parallel
1/4-inch phone jack connections shall be pro-
vided. (Two Neutrik Speakon
®
connections
shall be provided on the “E” version).
The loudspeaker system shall be the Electro-
Voice Eliminator Monitor (Monitoe (E)).
Uniform Limited Warranty
Electro-Voice products are guaranteed against
malfunction due to defects in materials or work-
manship for a specified period, as noted in the
individual product-line statement(s) below, or
in the individual product data sheet or owner’s
manual, beginning with the date of original pur-
chase. If such malfunction occurs during the
specified period, the product will be repaired
or replaced (at our option) without charge. The
product will be returned to the customer pre-
paid. Exclusions and Limitations: The Lim-
ited Warranty does not apply to: (a) exterior
finish or appearance; (b) certain specific items
described in the individual product-line
statement(s) below, or in the individual product
data sheet or owner’s manual; (c) malfunction
resulting from use or operation of the product
other than as specified in the product data sheet
or owner’s manual; (d) malfunction resulting
from misuse or abuse of the product; or (e)
malfunction occurring at any time after repairs
have been made to the product by anyone other
than Electro-Voice Service or any of its autho-
rized service representatives. Obtaining War-
ranty Service: To obtain warranty service, a
customer must deliver the product, prepaid, to
Electro-Voice Service or any of its authorized
service representatives together with proof of
purchase of the product in the form of a bill of
sale or receipted invoice. A list of authorized
service representatives is available from Elec-
tro-Voice Service at 600 Cecil Street, Bucha-
nan, MI 49107 (800/234-6831 or FAX 616/
695-4743). Incidental and Consequential
Damages Excluded: Product repair or re-
placement and return to the customer are the
only remedies provided to the customer.
Electro-Voice shall not be liable for any inci-
dental or consequential damages including, with-
out limitation, injury to persons or property or
loss of use. Some states do not allow the ex-
clusion or limitation of incidental or consequen-
tial damages so the above limitation or exclu-
sion may not apply to you. Other Rights: This
warranty gives you specific legal rights, and you
may also have other rights which vary from state
to state.
Electro-Voice Speakers and Speaker Sys-
tems are guaranteed against malfunction due
to defects in materials or workmanship for a
period of five (5) years from the date of origi-
nal purchase. The Limited Warranty does not
apply to burned voice coils or malfunctions such
as cone and/or coil damage resulting from im-
properly designed enclosures. Electro-Voice
active electronics associated with the speaker
systems are guaranteed for three (3) years from
the date of original purchase. Additional details
are included in the Uniform Limited Warranty
statement.
For warranty repair, service information, or a
listing of the repair facilities nearest you, con-
tact the service repair department at: 616/695-
6831 or 800/685-2606.
For technical assistance, contact Technical
Support at 800/234-6831 or 616/695-6831,
M-F, 8:00 a.m. to 5:00 p.m. Eastern Standard
time.
Specifications subject to change without
notice.
Figure 1—Axial Frequency Response,
(anechoic environment, 4 volts/3.05 meters
(10 feet), normalized to 1 watt/1 meter)
To Next Page
Loading...
