Electro-Voice EVERSE12-US - INPUT DSP control menu for BASIC mode

42 en | Input & Mixer operation EVERSE Battery-powered Loudspeaker
2023-12 | 02 |
User manual
Electro-Voice
LINK SPEAKERS
BACK
EXIT
Table6.4: INPUT 3/4 DSP control menu MIXER mode
INPUT DSP control menu for BASIC mode
1) Default
2) INPUT1 only
INPUTS 1 & 2
LEVEL MUTE
-80 dB
0 dB
1
+42 dB
INPUT 1 EXIT
48V
2
OFF
1
ON
EXIT
1) Default
2) 4-digit unique device
number
INPUT 3/4
LEVEL MUTE
-80 dB
0 dB
1
+42 dB
BACK
BLUETOOTH OFF
ON
1
BACK
ID
2
CONTROL PAIR
AUDIO PAIR
LINK SPEAKERS
BACK
BACK
Adjusting the incoming sound
Caution is advised when adjusting the incoming sound. Usually minor changes are sufficient
to produce the best results in the overall sound.
To adjust the incoming sound:
– Set all EQ controls to 0dB or FLAT.
– Avoid setting the EQ controls to extreme positions.
– Use natural reproduction as a starting point.
– Rely on your musically trained ear.