Electro-Voice EVOLVE50M‑SB‑US - Installation

EVOLVE Portable Column Loudspeaker Installation | en 13
Electro-Voice
User manual
2020-12 | v01 | F.01U.393.750
4 Installation
!
Caution!
Do not attempt to move this loudspeaker system when it is fully assembled.
You may damage the system or cause personal injury.
Assembling the loudspeaker system
To assemble the loudspeaker system, do the following:
1. Place the subwoofer on a level and stable surface.
2. Insert the pole into the subwoofer base.
The pole has magnets (A) at each end.
3. Place the column array loudspeaker system on top of the subwoofer pole.
4. The column array loudspeaker system set up is complete.
A
A
2. 3. 4.