Electro-Voice ZXA1 Series - Pole Mount Installation

ZXA1 Series Loudspeaker Installation | en 9
Electro-Voice
User manual
2022-06 | 06 | F.01U.218.487
Pole mount
Electro-Voice ZXA1-SUB loudspeakers include 35mm (1-3/8inch) pole mount cups to allow
mounting a full range speaker above it.
1
2
Figure3.3: ZXA1 pole mount location
1 Set screw 2 Pole mount recess
Make sure to:
– Use a speaker pole that is no longer than 1.2m (4ft) and mount a speaker weighing no
more than 11.3kg (25lb).
– Check that the ZXA1-SUB is placed on a flat and stable surface.
Figure3.4: ZXA1 and ZXA1-SUB full-range/sub stack with pole mount