To Next Page
J
James JohnsonNov 8, 2025
What to do if my Electro-Voice Zx1i Speakers have no sound?
- CChristopher BeckerNov 8, 2025
If your Electro-Voice Speakers aren't producing sound, start by checking the amplifier. Connect a known working speaker to the amplifier outputs. If there's still no sound, verify that all electronic components are on, the signal routing is correct, the audio source is active, and the volume is turned up. If there is still no sound, correct/repair/replace the amplifier as necessary. If the amplifier functions correctly with the test speaker, the issue is likely with the wiring. To troubleshoot the wiring, ensure the correct wire pairs are connected to the amplifier. Play audio at a low volume and connect the test speaker in parallel with the malfunctioning speaker line. If the sound level decreases significantly, there may be a short in the line, possibly due to damage. If the sound level ...
General
