Technical Support - A.D.L. 9/83 599 74 12-51 Rev.00
3.2.2 Control panel configuration
The washing programmes, the functions of the selector knob and the various buttons vary according to
the model, since these are determined by the configuration of the appliance.
3.2.3 Programme selector (S1)
The selector used is a knob that has an index and a zero position.
There are still 15 positions, 14 of which are programmable depending on the
models while the 0 position is not programmable and is fixed.
The programmes can be configured to perform different washing cycles (e.g.:
water level, drum movement, no. of rinses and the washing temperature to be
selected according to the type of garments).
The selector can be turned both clockwise and anti-clockwise.
For each programme, the compatible options and other parameters are defined.
3.2.4 Programme configuration
The table below lists the parameters that can be used to define the washing programmes.
Types of fabric Cotton / Linen, Synthetics, Delicates, Wool, Hand-wash, Shoes, Jeans, Duvet, Silk.
Special programmes
Soak, Mini-programme, Easy-Iron, Conditioner, Rinses, Delicate rinses, Drain,
Delicate spin, Spin.
Temperature
Adjustable: the initial temperature is the one configured for the chosen washing
programme.
Spin Adjustable.
Possible Options
Rinse Hold, Pre-wash, Stains, Extra Rinse, Normal, Daily, Super quick, Spin
reduction, No spin.
Programme phases Pre-wash, Wash, Rinses, Spin, Delayed start.
To Next Page