2010 dmm 85/96 599 73 68-54
13.3.5 Blade
This blade is secured to the drum with slides and secured with blades carved
into the drum.
To remove it from the drum:
Insert a flat-tip screwdriver into the central slot of the left row.
The screwdriver with the handle tilted towards the right
push the left-hand tab down.
The screwdriver with the handle tilted towards the left
push the right-hand tab down;
When the two tabs are down,
Move the blade towards the front of the drum, and if necessary squash the
blade at the two ends.
To Next Page
