Electrolux Built-in oven Instruction Book

85
To set the correct time of day :
a) press button and, while the symbol is
flashing (Fig. 3), set the correct time of day by
pressing buttons “ “ or “ “ (Fig. 4) .
The time arrow symbol will come off about 5
seconds after the correct time is displayed (Fig. 5).
b) if the symbol is not flashing anymore, press
button twice.
Then, proceed as described in point a).
When the oven is first connected to the
electrical supply, the display will automatically
show 12:00 and the symbol will flash.
IEnsure the correct time of day is set before
using the oven.
When the oven is first installed
— press button to switch on the oven.
— press button twice and select the
"Conventional Cooking" function (Fig. 6).
— set the temperature to 250°C using the
increasing push button “ “ .
— Allow the oven to run empty for
approximately 45 minutes.
— open a window for ventilation.
This procedure should be repeated with the
"Fan Cooking" and "Full Grill"
function for approximately 5-10 minutes.
During this time, an unpleasant odour
may be emitted. This is absolutely
normal, and is caused by residues of
manufacturing.
Once this operation is carried out, let
the oven cool down, then clean the oven
cavity with a soft cloth soaked in warm
soapy water.
Before cooking for the first time, carefully
wash the shelf and the dripping pan.
To open the oven door, always
catch the handle in its central part
(Fig. 7).
B
Fig. 3
B
Fig. 4
B
Fig. 5
B
Fig. 6
Fig. 7

Electrolux Built-in oven Specifications

General

Brand	Electrolux
Model	Built-in oven
Category	Oven
Language	English