Electrolux Combi TOUCH Series - Touch screen calibration

49
Time
This setting allows to set the current time.
• Set the time format (24H or AM/PM)
• Enter the time: touch the corresponding number on the
keypad.
Measurement units
• This setting allows to set the temperature measure unit (℃ or
℉).
Sound
This setting allows to set:
• the volume level from “0“ to “5“;
• enable / disable the End-cooking sound ( / );
• choose and set the “End-cooking“ jingle.
Cavity light
This setting allows to enable / disable the cavity light ( / )
• Set the brightness from 0 to 100 %;
• Enable / disable the end-cooking blinking light;
• Enable / disable the Alarm blinking light;
• Enable / disable the Preheat blinking light.
Display
This setting allows to:
• adjust the brightness of display from “0“ to “100“%
• set the sleep timeout value (minutes/seconds).
Touch screen calibration
This setting allows to set the calibration of the screen.
1. Touch the screen as close as possible to the centre of the
red cross;
2. Repeat until the cross turns green;
3. Touch and hold to exit;
Touch screen test
• Touch the points required to test the screen.
• Hold down to exit.
Date
Set format
2017
December
Set date
D/M/Y M/D/Y Y/M/D
SSFTWTM
3212928272648
1098765449
1716151413121150
2423222120191851
130292827262552
76543211
SETTINGS SERVICE
Time
Set format
24 H AM/PM
Set time
1 2 3
4 5 6
7 8
0
9
0 1 4 : 5
SETTINGS SERVICE
Measurement units
Temperature
°C °F
SETTINGS USER
Display
Brightness
100%
Sleep timeout
s
1 2 3
4 5 6
7 8
0
9
0 15 0 : 0
SETTINGS
m:s
Touch the screen as close as
possible to the center of the red
cross. Repeat until the cross turns
green. Touch and hold to exit.
-1
-1
-1
-1
50
50
1
2
3
4