Electrolux Combi TOUCH Series - Programs; MultiTimer

51
Utilities
• Cooking info in option drawer. The activation allows informa-
tion showing up in the drawer.
• Delayed start. The activation allows to postpone a cycle at a
more convenient time.
Hold
• Default convection temperature 70°. Touch the value to set
the required temperature on the appearing keypad.
• Default steam temperature 70°. Touch the value to adjust the
default temperature on the appearing keypad.
• Probe temperature increase 5°. Touch the value to adjust the
probe temperature on the appearing keypad.
Automatic
This setting allows to enable / disable ( / ) the Automatic
cooking and the related cycles.
NOTE!
If a mode is disabled, it is not visible in the upper
drawer.
Food type
• This setting allows single food type showing up on the display.
Special cycles+
• This setting allows single special cycle showing up on the
display.
Programs
This setting allows to enable / disable ( / ) the Programs
mode and the related functions.
Functions
• Show categories. This activation allows food categories to
show up on the display.
• Show most used. It allows most used programs to show up on
the display.
• Enable Programs save. It allows “save program“ function to
be shown on the display.
• Enable Programs modify. It allows “modify program“ function
to be shown on the display.
• Programs delete. It allows “delete programs“ function to be
shown on the display.
• Programs overwrite. It allows “overwrite programs“ function to
be shown on the display.
• Grid visualization. Once activated it allow to display all stored
program as a grid. If deactivated, the display show them as a
list.
• Enable skip preheat. It allows to skip the preheating phase.
MultiTimer
This setting allows to enable / disable ( / ) the MultiTimer
feature.
Once activated, it is possible to:
• enable/disable MultiTimer programs to show up on the
display;
• enable/disable temperature recovery inside the cavity.
This setting allows to enable / disable MultiTimer presets
functions:
• Enable Presets save. It allows “save preset“ function to be
shown on the display;
Manual
Enable Manual cooking
General
SETTINGS
Timer / Temperature
Cooking info in drawer
Delayed start
Utilities
Hold
Manual
Enable Manual cooking
General
SETTINGS
Timer / Temperature
70C°
Default convection
temperature
Default steam temperature
Probe temperature increase
Utilities
Hold
70C°
5C°
Automatic
Enable Automatic cooking
Food type
SETTINGS
Low temperature cooking
Eco Delta cooking
Regeneration
Static combi
Proving
Soous-vide
Cycles+
Programs
Enable Programs
Show categories
Show most used
Enable Program modify
Enable Program save
Programs delete
Programs overwrite
Grid visualization
Enable skip preheat
SETTINGS
riduzione figura in scala
del 20,5 %
MultiTimer
Enable MultiTimer
SETTINGS
Enable presets save
Enable presets modify
Enable presets delete
Multitimer presets
Enable MultiTimer programs
Enable temperature recovery