Electrolux COOKERS - Configuration; Firmware; 3 Position of the Input Electronics; Split Interfaces for Induction Hobs

- 5 -
DGS-TDS-N 12.08 U. H. / A. B. © Electrolux 599 714 137 EN
2.4 Configuration
The input electronics is self-configuring. This configuration defines:
- Power / size of the cooking zone
- Key-lock and stop & go function
- Power levels (9 / 14)
If the configuration is not matching to the interface functions are not available or the display of
the 7-Segement /Bargraph is not logic.
2.5 Firmware
The firmware is the software to control the interface independent on the configuration.
3. Position of the input electronics
3.1 Split interfaces for induction hobs
Induction coils
Kite Split
Silicone carrier
3.2 Split input electronics for hobs with radiant heating
Kite Split
Silicone carrier
Carrier
Power electronic