Electrolux COOKERS - Notes for Interventions on the Device; Connection Procedures for Appliance Interventions

- 8 -
DGS-TDS-N 12.08 U. H. / A. B. © Electrolux 599 714 137 EN
ca. 3 s
4.2 Radiant-heated cooking hobs with split input electronics
Hob is off:
Press On/Off
until Displays
are off again;
one beep
No Demo
mode active
Demo mode
active
Display
test
Start
Firmware
Interface
left and
right
Firmware
Power
board
Stored Error Codes
In split input electronics, the firmware version is shown in both of the timer
displays and has to be identical
With pressing the Plus-Key the last 3 stored Errors are displayed in serial
mode
If no failure is stored only “E” is displayed.
Service mode