EasyManua.ls Logo

Electrolux COP846X1 - Direct Steam Cooking; Additional Functions; Lock; Automatic Switch-Off

Electrolux COP846X1
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Step 2 Connect the injector tube to the steam inlet.
Step 3 Set the oven for the steam cooking function.
9.6 Direct steam cooking
Put the baking dish on the steel grill. Add some water. Do not use the lid.
WARNING!
The injector may be hot when oven operates. Always use oven gloves. Remove
the injector from the oven when you do not use steam function.
Step 1 Connect injector with injector tube. Connect injector tube to the steam inlet.
Step 2
Put the baking dish onto the first or second shelf position from the bottom.
Make sure that injector tube is not jammed. Keep the injector away from the heating
element.
Step 3 Set the oven for the steam cooking function.
When you cook food such as chicken, duck, turkey or large fish, put the injector inside the food.
10. ADDITIONAL FUNCTIONS
10.1 Lock
This function prevents an accidental change of the appliance function.
Turn it on when the appliance works - the set cooking continues, the control panel is locked.
Turn it on when the appliance is off - it cannot be turned on, the control panel is locked.
- press and hold to turn
on the function.
A signal sounds.
- press and hold to turn it
off.
3 x - flashes when the lock is turned on.
10.2 Automatic switch-off
For safety reasons the appliance turns off after some time, if a heating function works and you
do not change any settings.
27/44
ADDITIONAL FUNCTIONS

Table of Contents

Related product manuals