Error codes
Err F102 The appliance door is closed.
Err F102 The door lock is not broken.
00:00 There was a power cut. Set the time of day.
If the display shows an error code that is not in this table turn the house fuse off and on to restart
the appliance. If the error code recurs contact an Authorised Service Centre.
Cleaning
Problem Check if...
There is water in the appliance cavity. There is not too much water in the water tank.
- indicator is off.
There is enough water in the water tank. If wa‐
ter starts to leak in the appliance, and the indi‐
cator is still off contact an Authorised Service
Centre.
- indicator is on.
There is enough water in the tank. If the tank is
full and the indicator is still on contact an Au‐
thorised Service Centre.
The steam cooking does not work. There is no lime residue in the steam inlet
opening.
The steam cooking does not work. There is water in the water tank.
It takes more than three minutes to empty the
water tank or the water leaks from the steam
inlet opening.
There is no lime residue in the steam inlet
opening. Clean the water tank.
13.2 Service data
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove the rating plate from the appliance cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
40/44
TROUBLESHOOTING
To Next Page
Loading...
