EasyManua.ls Logo

Electrolux e:line EOEM61CS - Refitting the Oven Door Assembly

Electrolux e:line EOEM61CS
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
oven door removal & cleaning electrolux e:line ovens 31
Re-assembling top door trim
Take hold of the top door trim at each side and position
it to the inside edge of the glass.
Push the trim down with its top edge over glass panel
until the clip snaps in on each side of the trim.
Push the middle of the trim down to ensure it is straight
and firm against the glass panel.
Fitting the oven door
Take hold of the oven door with a hand on each side
and with the door at an angle of 45º, position the
recesses at the bottom of the door onto the hinge arms
of the oven. Let the door slide down the hinge arms as
far as it will go.
Open the door fully to access the hinges.
Rotate the ‘stirrups’ (see the image below) until they lock
into the hook. The oven door may now be closed.
Hook
Stirrup
Hook Stirrup

Related product manuals