EasyManua.ls Logo

Electrolux EBC54524 - Changing the Quantity of Milk and Coffee for Cappuccino

Electrolux EBC54524
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
13www.electrolux.com
• Removethehotwaterspoutandat-
tach the milk container to the nozzle
(fig. 17).
• Positionthemilkspoutasshowninfig.
18 and then place a sufficiently large
cup under the coffee and milk spouts.
• Pressthe icon (B12) (fig. 19).
“CAPPUCCINO...” is displayed and
after a few seconds, frothed milk flows
out of the milk spout into the cup be-
low. (Delivery stops automatically).
• Theappliancedeliverscoffee.
• Thecappuccinoisnowready.Sweeten
to taste and, if desired, sprinkle the
froth with a little cocoa powder.
NOTE 1: While making cappuccino, the
flow of frothed milk or coffee can be inter-
rupted by pressing the icon (B12).
NOTE 2: If the milk in the container
finishes while delivering frothed milk, re-
move the container and add milk. Reat-
tach and press the (B12) to request
a cappuccino again.
NOTE 3: To ensure the complete cleanli-
ness and hygiene of the milk frother,
always clean the circuits in the milk con-
tainer lid after making cappuccino.
“PRESS CLEAN!” flashes on the display.
• Placearecipientunderthemilkspout.
• PresstheCLEANbuttononthelid
(C3) and hold down for at least 5
seconds (fig. 20) to start the cleaning
function.
The appliance displays the message
“CLEANING!” above a progressive bar.
You should not release the CLEAN
button until the bar is complete indicat-
ing that cleaning is concluded.
When the CLEAN button is released,
the function stops.
After cleaning, remove the milk con-
tainer and place in the refrigerator.
The milk should not be left out of the
refrigerator for more than 15 minutes.
NOTE 4: To change the quantity of coffee
or frothed milk the appliance delivers
automatically into the cup, proceed as
described in the section “Changing the
quantity of coffee and milk for cappuc-
cino”.
The appliance is set by default to auto-
matically deliver a normal cappuccino.
To change these quantities, proceed as
follows:
14.1 Changing the quantity of milk
• Fillthecontainerwithmilkuptothe
maximum level indicated on the con-
tainer.
• Pressthe icon (B2) to enter the
menu, then press the icons (B7)
and (B8) (fig. 2) until “PROGRAM
CAPPUCCINO” is displayed.
• PresstheOKicon(B9)toconfirm.
“PROGRAM MILK” is displayed.
• PresstheOKicon(B9)again.
• Selectthequantityofmilkrequiredby
pressing the icons (B7) and (B8).
The progress bar shows the quantity of
milk selected.
• PresstheOKicon(B9)toconfirm(or
the icon (B6) to cancel the opera-
tion.
• Pressthe (B6) icon twice to exit the
menu.
14.2 Changing the quantity of coffee
• Pressthe (B2) icon to enter the
menu (fig. 15), then press the
icons (B7) and (B8) (fig. 2) until “PRO-
GRAM CAPPUCCINO” is displayed.
• PresstheOKicon(B9)toconfirmthen
the icons (B7 and (B8) (fig. 2)
until “COFFEE FOR CAPPUCC.” is
14. CHANGING THE QUANTITY OF COFFEE AND MILK
FOR CAPPUCCINO

Related product manuals