When the appliance is ready, you can
use the internal menu to modify the fol-
lowing parameters and functions:
• Chooselanguage
• Rinsing
• Shut-offtime
• Setclock
• Starttime
• Auto-start
• Temperature
• Waterhardness
• Programcoffee
• Programcappuccino
• Programjug
• Programhotwater
• Descale
• Resettodefault
• Statistics
• Buzzer
• Contrast
18.1 Setting the language
To change the language on the display,
proceed as follows:
• Pressthe icon (B2) to enter the
menu. “CHOOSE LANGUAGE” is
displayed.
• PresstheOKicon(B9).
• Pressthe icons (B7) and (B8)
until the required language is dis-
played.
• PresstheOKicon(B9)toconfirm.
• Pressthe icon (B6) to exit the
menu.
If you choose the wrong language,
you can access the menu directly
to modify the parameter.
• Pressthe icon (B2) for at least 7
seconds until the appliance displays
the various languages.
• Choosetherequiredlanguageas
described in the section “Using the ap-
pliance for the first time”.
18.2 Rinsing
This function enables you to obtain hotter
coffee.
Proceed as follows:
• Whenyouturntheapplianceon,ifyou
want to make a small cup of coffee
(less than 60 cc), preheat the cup by
rinsing it with hot water.
• Ifontheotherhandmorethan2/3min-
utes have passed since the last coffee
was made, before requesting another
coffee, you must preheat the brewing
unit by first pressing the icon (B2)
to enter the menu then the icons
(B7) and (B8) to select the “RINSING”
function.
Press the OK icon (B9).
“RINSING... PLEASE CONFIRM” is
displayed.
Press the OK icon (B9) again.
Deliver the water into the underlying
drip tray or alternatively use this water
to fill (and then empty) the cup to be
used for the coffee to preheat it.
18.3 Changing the length of
time the appliance remains on
The appliance is set by default to go off
automatically 30 minutes after the last
coffee has been made.
To change this interval (max. 120 min),
proceed as follows:
• Pressthe icon (B2) to enter the
menu and then the icons (B7)
and (B8) until “SHUT-OFF TIME” is
displayed.
• PresstheOKicon(B9)toconfirm.
• Pressthe icons (B7) and (B8) to
set the time after which the appliance
will go off (after 1/2 hour, 1 hour, 2
hours).
• PresstheOKicon(B9)toconfirm.
• Pressthe icon (B6) to exit.
18.4 Setting the clock
• Pressthe icon (B2) to enter the
menu and then the icons (B7)
and (B8) until “SET CLOCK” is dis-
played.
• PresstheOKicon(B9).
• Usethe icons (B7) and (B8) to
set the hour, then press the OK icon
18. CHANGING AND SETTING MENU PARAMETERS