Electrolux EDW 1003 - Program Selection Process

6.3. Input philosophy: Program selection
1. Appliance in switched-off condition
2. Switch on appliance with ON/OFF key S0
-- "prestart" mode
Ä
Appliance is in the prestart mode
Ä
All LEDs of the program keys and the "SZV" (start-time preselection) key are lit, the keys can be
selected.
Selection of a start time possible
(see description page B 4 / "Input philosophy start-time preselection")
3. Select program by pressing the corresponding key.
Ä
Corresponding program LED is lit.
Within 3 seconds it is possible to alter or additionally select an option.
Selection of a start time possible
(see description page B 4 / "Input philosophy start-time preselection")
4. Program starts only when the door has been closed.
Up to this moment it is possible to alter or additionally select an option at any time.
When the door has been closed, the program will start automatically.
Ä
Corresponding program LED is lit.
EDW 1003 / VGA
LD1 LD2 LD3 LD4 LD5 LD6
S1 S2 S3 S4 S5 S6
LD7
LD8
LD9
LD10
LD11
LD12
S0
LD1
LD2 LD3 LD4 LD5 LD6
S0
2.
1.
LD3
S3
3.
4.
LD3
LD1 LD2 LD3 LD4 LD5 LD6
S1 S2 S3 S4 S5 S6
LD7
LD8
LD9
LD10
LD11
LD12
S0
Tür schließen
22