43
Replacing the centre glass plates
1. From above, insert the centre plates obliquely into
the retaining frame at the handle, one after
another (
á).
2. Lower the centre plates down and push them to-
wards the lower edge of the door as far under the
retaining frame as they will go (
à ).
Replacing the upper glass plate
1. From above, insert the upper-most plate obliquely
into the retaining frame at the handle (
á ).
2. Lower the plate. Place the glass against the pres-
sure spring at the handle, and in front of the retain-
ing frame at the lower edge of the door. Push it
into the frame (
à ).
The glass plates must be firmly attached.
Re-attach the door to the oven
To Next Page
Loading...
