31
Useful hints on practical problems
practical problem possible cause remedy
Items to be baked or roasted
would not really rise
Wrong temperature setting Check the temperature set with the
indications of the chart
Items to be baked or roasted
would not become brown
Too low a temperature
Wrong material of tins/moulds
Increase the temperature setting,
look into the state of cooking,
possibly shorten the time
With top and bottom heat make use
of dark oven tins only.
Items to be baked or roasted
become too dark
Too high a temperature Check the temperature set with the
indications of the chart, reduce the
temperature setting, possibly extend
the time
Items to be baked or roasted
become too dry
Duration of baking too long because of
too low a temperature
Check the temperature set with the
indications of the chart, possibly
increase the temperature setting
and shorten the time
Items to be baked too moist Not possible to bake out sufficient mois-
ture owing to too high temperature
Too much moisture in dough
Select lower temperature
Prepare dough with less liquid
Hints on technical problems
technical problem possible cause remedy
The built-under oven would
not function
Trouble with the power supply Check the fuselage
In spite of function
switched-on and
temperature set the oven
would not get hot
An automatic program with a later on
start of cooking was set
Cancel automatic adjustments of the
electric clock with the changeover
button, possibly readjust
Oven lighting would not
come on
The bulb is defective Replace the bulb - see page 30
Meat probe not functioning Not inserted correctly or defective Check plug contact
Service symbol lights According to fault code Inform customer service
12:00 flashes in electronic
timer
Power failure Set time–of–daysee page 9
Damaged appliances must not be used. In case of trouble or failure do please cut off or unscrew the fuse.
Do not anything with the oven. Inappropriate work may lead to damages with persons and material.
Not being in a position to cure a trouble or failure with the help of the hints do please contact your after-sales-
service.
STOP
To Next Page
Loading...
