27
Cook time and end time functions in combination
3 The cook time function and the end time function can be used simultane-
ously if the oven is required to automatically switch itself on and off at a fu-
ture point in time.
1.Select the oven function and the tem-
perature.
2.Set the required cooking time using the
cook time function . E.g. 1 hour.
3.Using the end time function , set the
time at which the dish is to be ready.
E.g. 14:05
The cook time arrow and end time
arrow are lit up.
The oven will automatically switch itself
on at the time required (as calculated).
E.g.: 13:05
When the period of cooking time (as set)
has elapsed, an acoustic signal will
sound for 2 minutes and the oven will
switch itself off.
E.g.: 14:05
To Next Page
Loading...
