Electrolux EPT-800 - Provisional Installation

SE ECG IG SIEGE NI a
SS me ley ar areas
PROVISIONAL INSTALLATION
This
method
of
installation
does
not
require
a
permanent
opening
in
the
room.
The
exhaust
hose
is
inserted
through the
gap of
a
slightly
opened
door or
window.
This
allows
the
unit
to
be
easily
moved
from
room
to
room
and
re-installed
within
minutes.
Fit the window nozzle (4, Fig. 3) on the end of the exhaust hose and insert it through the
opening of a door or a window. Use suction pads (3, Fig. 3) to hold the window in place.
(Fig. 6)
WARNING: Make sure the unit is level
\\
\
(WW
et (Lf
Figure 6
English 5