EasyManuals Logo

Electrolux ESS42200SW User Manual

Electrolux ESS42200SW
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
drying performance, always use rinse aid
and keep the rinse aid indicator active.
To deactivate the rinse aid dispenser and
indicator, set the level of rinse aid to 0.
How to set the rinse aid level
Make sure the appliance is in user mode.
1. Press
.
The indicator still
flashes.
The remaining indicators are off.
The display shows the current
setting: e.g. = level 4.
2. Press repeatedly to change the
setting.
3. Press the on/off button to confirm the
setting.
7.4 AirDry
AirDry improves the drying results with
less energy consumption. The appliance
door opens automatically during the
drying phase and remains ajar.
AirDry is automatically activated with all
programmes other than (if
applicable).
The duration of the drying phase and the
door opening time vary depending on the
selected programme and options.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
If, afterwards, the door is
closed for at least 3 minutes,
the running programme
ends.
CAUTION!
If children have access to
the appliance, we advise to
deactivate AirDry. The
automatic opening of the
door may pose a danger.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press .
The indicator
still flashes.
The remaining indicators are off.
The display shows the current
setting:
= AirDry is deactivated.
= AirDry is activated.
2. Press
to change the setting.
3. Press the on/off button to confirm the
setting.
8. BEFORE FIRST USE
1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not put dishes in
the baskets.
After starting the programme, the
appliance recharges the resin in the
water softener for up to 5 minutes. The
washing phase starts only after this
procedure is complete. The procedure is
repeated periodically.
ENGLISH 13

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Electrolux ESS42200SW and is the answer not in the manual?

Electrolux ESS42200SW Specifications

General IconGeneral
Door colorWhite
Control typeButtons
Product sizeSlimline (45 cm)
Built-in displayYes
Custom panel-ready-
Outlet hose length1.5 m
Appliance placementFreestanding
Cycle time160 min
Noise level49 dB
Drying systemAirDry
Delay start (max)24 h
Number of place settings9 place settings
Number of washing programs8
Number of temperature settings4
Current10 A
Connected load1950 W
AC input voltage220 - 240 V
AC input frequency50 Hz
Energy efficiency scaleA to G
Water consumption per cycle9.9 L
Energy consumption per cycle0.689 kWh
Weight and Dimensions IconWeight and Dimensions
Depth615 mm
Width446 mm
Height850 mm
Weight36900 g
Installation compartment depth570 mm
Installation compartment width450 mm
Installation compartment height (min)820 mm

Related product manuals