Electrolux ESS42200SW User Manual

2. Remove the filter (C) out of filter (B).
3. Remove the flat filter (A).
4. Wash the filters.
5. Make sure that there are no residues
of food or soil in or around the edge
of the sump.
6. Put back in place the flat filter (A).
Make sure that it is correctly
positioned under the 2 guides.
7. Reassemble the filters (B) and (C).
8. Put back the filter (B) in the flat filter
(A). Turn it clockwise until it locks.
CAUTION!
An incorrect position of the
filters can cause bad
washing results and damage
to the appliance.
11.5 Cleaning the lower spray
arm
We recommend to clean the lower spray
arm regularly to prevent soil from
clogging the holes.
Clogged holes can cause unsatisfactory
washing results.
1. To remove the lower spray arm, pull
it upwards.
ENGLISH 19

Electrolux ESS42200SW Specifications

General

Door color	White
Control type	Buttons
Product size	Slimline (45 cm)
Built-in display	Yes
Custom panel-ready	-
Outlet hose length	1.5 m
Appliance placement	Freestanding
Cycle time	160 min
Noise level	49 dB
Drying system	AirDry
Delay start (max)	24 h
Number of place settings	9 place settings
Number of washing programs	8
Number of temperature settings	4
Current	10 A
Connected load	1950 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Water consumption per cycle	9.9 L
Energy consumption per cycle	0.689 kWh

Weight and Dimensions

Depth	615 mm
Width	446 mm
Height	850 mm
Weight	36900 g
Installation compartment depth	570 mm
Installation compartment width	450 mm
Installation compartment height (min)	820 mm