8.4 Automatic programmes with
the core temperature sensor
The core temperature of the food is de-
fault and fixed in programmes with the
core temperature sensor. The programme
ends when the appliance is at the set
core temperature.
1.
Activate the appliance.
2.
Touch .
3.
Install the core temperature sensor
(refer to "The core temperature sen-
sor").
4.
Touch or to set the pro-
gramme for the core temperature
sensor.
The display shows the cooking time,
and .
5.
Touch or the settings save auto-
matically after five seconds.
6.
When the set time ends, an acoustic
signal sounds for two minutes.
flashes. The appliance deactivates.
7.
Touch a sensor field or open the door
to stop the acoustic signal.
9. USING THE ACCESSORIES
WARNING!
Refer to the Safety chapters.
9.1 Core Temperature Sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
There are two temperatures to set:
• The oven temperature: refer to the table
for roasting in the recipe book.
• The core temperature: refer to the table
for the core temperature sensor in the
recipe book.
Only use the core temperature
sensor supplied or the correct re-
placement parts.
1.
Activate the appliance.
2.
Put the tip of the core temperature
sensor (with
on the handle) into
the centre of the meat.
3.
Put the plug of the core temperature
sensor into the socket at the front of
the appliance.
The display shows
and the de-
fault set core temperature. The tem-
perature is 60 °C for the first opera-
tion, and the last set value for each
subsequent operation.
4.
Touch or to set the core tem-
perature.
5.
Touch or the settings save auto-
matically after 5 seconds.
Useful information:
You can set the core temperature on-
ly when
flashes. If is in the
display but does not flash before you
ENGLISH 15
To Next Page
Loading...
