35
MULTI STAGE
This feature enables you to perform sequential cooking at the touch of a button. Its purpose is to
program a queue of up to three cooking modes with individual cooking time and temperatures in a
sequence. This feature can be used with most cooking modes; Baking, Broiling, Convection Baking,
Convection Roasting, Convection Broiling, Keep Warm and Bread Proof. A Cook Time can be
programmed with your cooking mode and then queued. No Auto-Suggest default temperature is
provided with this feature. Any stage programmed with Broil or Convection Broil cannot last longer
than 10 minutes. A proper cook time and a set temperature are required for every stage programming.
At least two stages must be programmed before a Multi-Stage cooking operation starts.
To set a Multi Stage sequence (Timed Convection Bake, Timed Broil, Keep Warm):
1. Arrange interior oven racks and place food.
2. Select oven by pressing UPPER OVEN
UPPER
OVEN
3. Press MULTI STAGE .
Stage 1
4. Press CONVECTION BAKE . “000” will flash in the display prompting to enter a temperature.
5. Enter a temperature using the numeric pads
0
to
9
.
6. Press START . “00:00” will start flashing in the display prompting to enter a cook time.
7. Enter a cook time using the numeric pads
0
to
9
.
8. Press START . The Multi-Stage indicator will now display the 2nd stage.
Stage 2
9. Press BROIL . “000” will start flashing in the display prompting to enter a temperature.
10. Enter a temperature using the numeric pads
0
to
9
.
11. Press START . “00:00” will start flashing in the display prompting to enter a cook time.
12. Enter a cook time using the numeric pads
0
to
9
.
13. Press START . The Multi-Stage indicator will now display the 3rd stage. If a third stage
is not needed, press START a second time. This will start the cooking sequence.
Stage 3
14. Press KEEP WARM . “000” will start flashing in the display prompting to enter a temperature.
15. Enter a temperature using the numeric pads
0
to
9
.
16. Press START . “00:00” will start flashing in the display prompting to enter a cook time.
17. Enter a cook time using the numeric pads
0
to
9
.
18. Press START twice. The cooking sequence will begin.
Canceling
19. At the end of the sequence, the display will show “End” and a chime will sound.
20. Remove food.
21. Press CANCEL to stop or cancel the Multi-Stage sequence at any time.
Cooking Modes
To Next Page
Loading...
