EasyManua.ls Logo

Electrolux IC44819FFS - Working Place Lighting

Electrolux IC44819FFS
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
0608 1
7
Notice
Date Page
05102004
INSTALLATION
MANUAL
7. Installation
Working place lighting
The lighting should be designed so as to avoid eye strain for the operator ; it should be uniform
without any glare, and should be sufcient to detect any hazards.
The average lighting value on the working place recommended by the clothing industry for
inspecting linen is 500 lux.
Whenever possible, the working place should be illuminated by daylight.
Supplies
Take the box.
List of accessories provided with each machine :
• operating handbook + installation manual + electrical drawing + poster,
• 2 keys for frames.
Check that no damage has been caused during transport.
Unpacking
You should have found an instruction handbook and keys to open the machine casings, in the
machine.
Depending on its destination, the dryer is delivered bare or may be placed on a transport pallet
and/or packed with plastic lm.
In some cases, it may be delivered in a crate, or in maritime packing (wood box).
Please refer to the handling chapter in this instruction handbook for a description of handling
operations.
Take off the plastic lm or remove the four wood socles with an spanner.

Related product manuals