1011 15
7
D1062
D0491
Notice
Date Page
05102004
INSTALLATION
MANUAL
7. Installation
Gas connection
The installation, connection and gas arrival adjustments for the
machine must be done by qualied personnel only.
Gas supply DN 20 (3/4" BSP)
The customer must install a lter and a
manual stop valve on the supply side of the
machine if natural gas is used.
For butane or propane, the customer must
install a lter, a manual closing valve and a
pressure reducer.
Connect the installation at the back of the
machin.
Gas connection
Air lter
Injectors
Service tank
Venturis
Gas burner
Gas inlet
To Next Page
Loading...
