Electrolux TD50 - Troubleshooting Guide; General Troubleshooting Approach; Error Code Analysis

39
Troubleshooting
Troubleshooting
General
The dryer is equipped with an automatic diagnostic system.
Operatingproblemsaredisplayedasblinkingerrorcodes.Wheneveran
error occurs, the dryer stops operating.
Except where noted, error codes are cleared by disconnecting the power
or by entering the service program.
Error analysis
A diagnostic procedure is provided for each error code. If an error
has not been corrected after the procedure, please contact the
manufacturer for additional assistance.
Explanation to error analyses
Replace the PCB.
A reference to a section in the
service manual to the dryer in
question.
Troubleshooting