Electrolux Unic Tango Ace - Page 26

26
Tango 0060 5-2021
Lift aluminum reinforcement
cover from lower coupling
Relieve tension on Turn-
table shaft by rocking it
with a 10 mm wrench
Slide the upper coupling
down
Unplug Machine Remove Grounds Drawer
Remove the 4 side
screws from the shroud
panel
Use a at screwdriver to
push coupling down if nec-
essary
Turntable shaft released
Tango Turntable Service
Access Turntable
!
4
5
21
8
7
6
Remove the Inner Panel
3