gb
54
STARTING UP THE NEW MACHINE
FOR THE FIRST TIME
E
1
2
3
WATER SUPPLY (N)
1) Lift up the cup-warming tray 6.
2) Pour the water into the tank 8 with a jug, to a maximum level of 4 or 5 centimetres
below the upper rim, in order to prevent overflowing.
- Water shortage in tank 8 is signalled by an intermittent buzzer and by the flashing
of warning light 3.
- While there is no water in the machine, all functions are automatically interrupted
for safety reasons (e.g. coffee brewing stops).
- Once it has been filled up with water, the machine automatically starts working
again (e.g. coffee brewing starts again).
WATER SUPPLY (L)
1) Fill 3/4 of the boiler 2 with cold, drinkable water, lifting the cover 7 and loosening
the safety valve 8.
Before filling the tank again:
- Turn the machine off by putting the main switch into the “OFF” position,
- Turn the knob 5 of the steam wand 6 and wait for all the steam to go out and for
the pressure gauge 15 pointer to be on zero.
WATER SUPPLY (S-V)
1) Fill the tank 8 with cold, drinkable water, lifting the cover 7.
To Next Page
Loading...
