To Next Page

To Previous Page

Basic operation – Choosing TV channel

TURNING ON AND OFF THE TV

TURN ON LCD TV

1. Connect the AC input cable to power to the LCD TV. At this time the TV will enter standby mode and indicator show red.

2. User POWER button or

button on the remote control.

3. Wait 5 seconds after switching off LCD TV then you can turn on LCD TV again.

CHOOSING TV CHANNEL

1. Using the CH + / CH - on the front panel or on the remote control.

! Press CH + to increase channel number.

! Press CH - to decrease channel number.

! When no OSD menu is used, the arrow keys

/ can also work as CH + / CH - buttons.

2. Using 0-9 digital buttons and – button.

Enter the channel’s number with 0-9 digital buttons and – button, then press ENTER button to switch the channel.

3. For example:

! To play channel 4: Press digital button 4, then press ENTER button.

! To play channel 45: Press digital button 4, and then press 5, press ENTER button at last.

! To play channel 121: Press digital button 1 and 2, and then press 1, press ENTER button at last.

! To play channel 13-4: Press digital button 1, 3, follow by “ - “ button, and then press 4, press ENTER button at last.

Element 40LE45Q User Manual

Questions and Answers: