Why does my Element LED TV show a blue screen?
If your Element LED TV shows a blue screen, it likely means there's no signal. To fix this, press the SOURCE button on your remote to select the correct input source.
What does it mean when the red LED indicator light is on, on my Element ELST3216H?
If your Element LED TV displays a red LED indicator light, it may be in standby mode. Press either the Power button or the Standby button on the remote control to turn it on.
Why does the picture appear slowly on my Element LED TV?
If the picture on your Element LED TV appears slowly after switching it on, this is normal as the image is muted during the product startup. If the picture hasn't appeared after 5 minutes, please contact a service provider.
Why is the reception poor on some channels on my Element ELST3216H?
If you experience poor reception on some channels on your Element LED TV, the station or cable might be experiencing problems, so try tuning to another station. If the station signal is weak, reorient the antenna for better reception. Also, check for sources of possible interference.
What does 'The signal is out of range' mean on my Element LED TV?
If your Element LED TV displays 'The signal is out of range,' adjust the resolution, horizontal, or vertical frequency. Check whether the signal cable is connected or loose and verify the input source.
Why is my Element TV screen blue?
A blue screen on your Element TV usually indicates that there is no signal. Press the SOURCE button to select the correct source.
What to do if my Element TV has no sound?
If your Element TV has no sound, first ensure that the sound isn't muted. If it is, turn the mute function off. Also, check the volume settings to make sure the volume isn't set too low. If you are using external leads, verify that they are properly connected.
What to do if my Element TV remote control does not work?
If the remote control for your Element TV isn't working, check for any obstructions between the remote and the TV. Ensure the batteries are installed with the correct polarity (+/-). Also, verify that the correct remote operating mode is set (TV, VCR, etc.). If these steps don't work, try installing new batteries.
Why is there no sound on my Element LED TV?
If there is no sound on your Element LED TV, there might be several reasons. First, check if the sound is muted and turn mute off. Second, verify the volume settings to ensure the volume isn't set too low. Finally, if you're using external leads, make sure they are connected properly.
What to do if my Element ELST3216H has no sound and picture?
If your Element LED TV has no sound and picture, check that the main plug is connected to a wall outlet and that you have pressed the POWER button on the front of the TV. Also, check the picture contrast and brightness settings.
Detailed electrical safety guidelines for the TV.
Guidelines for safe handling and placement of the TV.
Identifies buttons and functions of the remote.
Main menu for TV configuration options.
General TV settings like language and zoom.
Adjusting picture quality settings.
Restricting content based on age and ratings.
Details MPAA and TV Parental Guideline rating systems.
Step-by-step guide for initial TV configuration.
Configuring network connections.
General| Screen Size | 32 inches |
|---|---|
| Display Technology | LED |
| Resolution | 1366 x 768 |
| Aspect Ratio | 16:9 |
| Refresh Rate | 60 Hz |
| HDMI Ports | 3 |
| USB Ports | 1 |
| VGA Input | Yes |
| Built-in Tuner | Yes |
| Audio Output | 10W |
| Power Consumption | 45W |
| Smart TV | No |
| Weight | 4.5 kg |
To Next Page
