Note
Note: Disposal of all end-of-life consumable items should be in accordance with local statutory
regulations.
An approved supplier or distributor should carry out any maintenance work not included in this manual.
WARNING!
3.1 Cleaning the Inlet Filter Assembly
Follow the instructions below.
Chorus 2 Operator Manual MANU40003 Version 03 3/19 Page 3
• Isolate the eletrical suppy. • Turn off water suppy, remove inlet pipe.
• Unscrew the inlet lter and remove the mesh lter.
Replace or clean and re-assemble.
• Reconnect the water and power supply.
Mesh Filter
Inlet Filter
Water Supply
Power Supply
Isolate the eletrical suppy.
1
2
3
5
6
4
7
8
10
9
3. MANTENANCE