SET - UP
7
REMOVING THE BYPASS PACK LC233
a. Open right hand door. b. Remove Bypass LC233.
Bypass LC233.
c. Remove Puri cation pack transit plugs
d. Insert Puri cation pack and turn handle. e. Make sure it’s secure.
CONNECT THE POWER (NO.6 PORT)
8
b. Only use the power supply
supplied by ELGA®.
The power supply must be earthed.
ONLY USE THE APPLIANCE
COUPLER (MAINS LEAD) AND
POWER SUPPLY PROVIDED.
IF THE EQUIMENT IS USED IN A
MANNER NOT SPECIFIED BY
ELGA,THE PROTECTION
PROVIDED BY THE EQUIPMENT
MAY BE IMPAIRED.
POSITION THE POWER SUPPLY
SO THAT IT CANNOT COME
INTO CONTACT WITH WATER.
WARNING!
a. Connect the power cable
as shown 1-2-3.
3
2
1
To Next Page
Loading...
