EasyManua.ls Logo

ELGA PURELAB Chorus User Manual

ELGA PURELAB Chorus
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PURELAB
®
Chorus
Configuration & Installation Guide
(PAF0076-01)

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the ELGA PURELAB Chorus and is the answer not in the manual?

ELGA PURELAB Chorus Specifications

General IconGeneral
Type of WaterType I, II, III
Total Organic Carbon< 5 ppb
Endotoxin< 0.001 EU/mL
DisplayTouchscreen
Weight25 kg
Resistivity18.2 MΩ.cm
Bacteria<1 CFU/mL
Applicationsmolecular biology, cell culture
Dispense RateUp to 2 l/min
Particle Size0.2 μm
Power Supply100-240 V, 50/60 Hz
DNaseNot detected

Summary

Introduction

Health & Safety

Guidelines for safe operation, including environmental and electrical precautions.

Health & Safety

Electrical Safety

Precautions for electrical connections, power supply, and grounding.

UV Light and Biostat

Safety for UV lamp exposure, disposal, and biostat flushing procedures.

Installation Kits & Parts

External Connections

Internal Connections: Chorus 3/2

Microprocessor Board Layout

Internal connections and component layout for the main microprocessor board.

Wall Mounting Kits & Configurations

Chorus 3/2 with 15/30L Reservoir Underneath

Configuration for Chorus 3/2 with 15/30L reservoir mounted underneath.

Chorus 3/2 with 60L Reservoir Underneath

Configuration for Chorus 3/2 with 60L reservoir mounted underneath.

Chorus 3/2 with 15/30L Reservoir Top Mount

Configuration for Chorus 3/2 with 15/30L reservoir mounted on top.

Chorus 3/2 with 60/100L Reservoir Top Mount

Configuration for Chorus 3/2 with 60/100L reservoir mounted on top.

Chorus 1 with Halo Dispense Top Mount

Configuration for Chorus 1 with Halo Dispense integrated on top.

Chorus 1 with Halo Dispense Underneath Mount

Configuration for Chorus 1 with Halo Dispense integrated underneath.

Chorus 1 with Halo & 15/30L Reservoir Top Mount

Configuration for Chorus 1 with Halo Dispense and 15/30L reservoir on top.

Chorus 1 with Halo & 15/30L Reservoir Underneath Mount

Configuration for Chorus 1 with Halo Dispense and 15/30L reservoir underneath.

Halo Dispense with 15/30L Reservoir Top Mount

Wall mounting configuration for Halo Dispense with 15/30L reservoir on top.

1x PURELAB Chorus 3 (RO) Configuration

2x PURELAB Chorus 3 (30lph) Configuration

3x PURELAB Chorus 3 (30lph) Configuration

4x PURELAB Chorus 3 (30lph) Configuration

1x PURELAB Chorus 2 (RO/DI) Configuration

2x PURELAB Chorus 2 (RO/DI) Configuration

3x PURELAB Chorus 2 (RO/DI) Configuration

4x PURELAB Chorus 2 (RO/DI) Configuration

PURELAB Chorus 1 Series

Integrated Halo Dispense Setup

Configuration for Chorus 1 with integrated Halo dispense unit, including connections and kits.

Remote Halo Dispense Setup

Configuration for Chorus 1 with remote Halo dispense unit, including connections and kits.

Gravity Feed - Halo Dispense Configurations

Pressurized Feed - Halo Dispense Configurations

Related product manuals