What to do if there is a leak detection in ELGA Laboratory Equipment?
If the ELGA Laboratory Equipment detects a leak, first, press the mute button to silence the alarm. Then, isolate the power, rectify the leak, and dry the sensors. Ensure you also dry the contacts. Finally, power the system back on to reset it.
What to do if I get a water purity alarm on my ELGA CENTRA-R 60 US Laboratory Equipment?
If you encounter a water purity alarm with your ELGA Laboratory Equipment, start by pressing the mute button to silence the alarm. Then, confirm that the displayed purity level is suitable for your specific application. If the water purity is insufficient, replace the Labpure L1.
What should I do if the permeate temperature alarm goes off on my ELGA Laboratory Equipment?
If your ELGA Laboratory Equipment's permeate temperature alarm is triggered, first press mute to silence the alarm. Next, confirm that the temperature is suitable for your application. You may also need to adjust the alarm setpoint or ensure that the potable supply temperature is appropriate.
What should I do if the break tank is low in my ELGA Laboratory Equipment?
If your ELGA Laboratory Equipment is showing a 'Break Tank Low' issue, first, press the mute button to silence the alarm. Next, confirm the pressure and flow of the potable supply. If the problem continues, it is recommended to contact your local service provider.
What causes permeate over temperature in ELGA CENTRA-R 60 US?
If your ELGA Laboratory Equipment displays a permeate over temperature warning, and the potable feed temperature is unacceptably high (over 50°C), first, press the mute button to silence the alarm. Then, locate the source of the high temperature and rectify it.
How to resolve high loop pressure in ELGA CENTRA-R 60 US?
If you are experiencing high loop pressure with your ELGA Laboratory Equipment, first, press the mute button to silence the alarm and isolate the power. If the issue persists, contact Technical Support.
What to do if the UF / MF is incorrectly installed in ELGA CENTRA-R 60 US?
If the UF / MF is incorrectly installed in your ELGA Laboratory Equipment, first, press the mute button to silence the alarm. Then, confirm that the UF / MF is correctly installed. Finally, power the system off and on to reset it.
What to do if Labpure L1 is incorrectly installed in ELGA CENTRA-R 60 US?
If the Labpure L1 is incorrectly installed in your ELGA Laboratory Equipment, first, press the mute button to silence the alarm. Then, confirm that the Labpure L1 is correctly installed. Finally, power the system off and on to reset it.
What to do if Protek is incorrectly installed in ELGA Laboratory Equipment?
If the Protek is incorrectly installed in your ELGA Laboratory Equipment, first, press the mute button to silence the alarm. Then, confirm that the Protek L1 / L2 is correctly installed. Finally, power the system off and on to reset it.
How do I fix a water temperature alarm on my ELGA Laboratory Equipment?
If you're getting a water temperature alarm on your ELGA Laboratory Equipment, start by pressing the mute button to silence the alarm. Then, confirm that the temperature is suitable for your application. You can also adjust the alarm setpoint or direct water to drain to introduce cool water.
Provides guidance on how to use the operator manual effectively.
Information on obtaining service and consumable items from suppliers.
General warnings and cautions for safe operation and potential hazards.
Specific safety note regarding the mandatory earthing of the appliance.
Safety note on isolating water supply and releasing residual pressure.
Information on chemicals like EfferSan and Minncare used for sanitization.
Details on the availability of safety data sheets for unit components.
Lists part numbers, descriptions, and service life of replaceable consumables.
Guidance on the initial setup and installation of the CENTRA-R unit.
Steps required to complete before the unit can be used for applications.
Explains the function and use of Master, User, and Sanitization keys.
Configuration settings for clock, date, alarms, units, and operational modes.
Procedures for setting reminders for filter and lamp replacements.
Setting programmed operating hours to optimize efficiency and minimize temperature rise.
Enabling constant water recirculation for high demand or fluctuating usage.
Procedure for replacing the composite vent filters when indicated or periodically.
Guide for installing an optional Labpure L1 purification cartridge to upgrade performance.
Procedure for replacing the Labpure L1 purification cartridge due to deterioration.
Guide for installing an optional micro filter for enhanced water purification.
Procedure for replacing the micro filter based on alarms or usage.
Procedure for replacing the UV lamp due to consumable alarm or time limit.
Procedure for replacing pre-treatment cartridges based on feed water quality.
Procedure for replacing the E-cartridge when indicated by an alarm.
Information regarding the replacement of Reverse Osmosis modules.
Covers procedures for liquid sanitization including RO and Recirculation types.
Covers procedures for tablet sanitization including RO and Recirculation types.
General| Brand | ELGA |
|---|---|
| Model | CENTRA-R 60 US |
| Category | Laboratory Equipment |
| Language | English |
To Next Page