ELIS PLZE a. s., 425/15, , Czech Republic, phone.: +420 377 517 711, fax: +420 377 517 722 Es 90678K
2.3 Associated documents
• Representation on CE compliance
• Calibration report optional (provided on request)
2.4 Flowmeter rating plates
2.4.1 Main meter plate
The main meter rating plate is located on top of the meter housing.
Both compact and remote meter versions
Example of the main meter plate
Comments
1 Manufacturer’s name and address
2 CE mark and identification numbers of relevant authorities
2.4.2 Transmitter plate
The transmitter rating plate is attached to the rear cover of the transmitter terminal box.
Both compact and remote meter versions
Example of the transmitter plate
Comments
1 Transmitter for both compact and remote meter versions
2 Power supply 95 to 250VAC, 45 to 65Hz, 3VA max., or 24 ± 20% VDC, 3W max.
3 Output functions (binary, frequency, pulse or current outputs, communication interface) are pre-set in production as
required in the product order documentation, but the user may subsequently change the setting.
To Next Page
Loading...