Eliwell EWDR 983/CS - Programming Menu

CP
dEF
FAn
AL
level 1 par
level 1 par
level 1 par
level 1 par
PA10
set PA1 value
Add
diS
CnF
Fpr
level 1 par
level 1 par
level 1 par
level 1 par
PA2
level 2 par
level 2 par
level 2 par
level 2 par
level 2 par
level 2 par
level 2 par
CP
dEF
FAn
AL
Add
diS
CnF
PA20
set PA2 value
level 2
change
par value
scroll
parameters
press for 5 sec
dd
Fd
level 2 par
Lit
level 2 par
nAd
nAd
level 1 par
dd
Fd
level 1
FnC
functions
scroll
functions
activate/disactivate
function
level 2 par
Lin
985/CSK
PROGRAMMING MENU
EWDR 983-985/CS (LX) - EWDR 985/CSK (LX)
10/12
MAX/MIN ALARMS
Minimum temperature alarm
Maximum temperature alarm
LAL
AFd
HAL
AFd
1
Setpoint - LAL
AFd
Off
Setpoint + HAL
AFd
2
Setpoint - LAL + AFd
Setpoint + HAL - AFd
Setpoint
Temperature lower than or equal to LAL (LAL with sign)
Temperature lower than or equal to Set point + LAL*
Temperature greater than or equal to Setpoint + HAL**
Temperature greater than or equal to HAL (HAL with sign)
Maximum temperature alarm
release
Minimum temperature alarm
release
Temperature higher than or equal to LAL + AFd Temperature greater than or equal to Setpoint + LAL + AFd
Temperature lower than or equal to Setpoint + HAL - AFd
Temperature lower than or equal to HAL - AFd
Temperature expressed as an absolute value (par “Att”=0) Abs(olute) Temperature in relation to set point (par “Att”=1) rEL(ative)
if Att=reL(ative) LAL must be negative: therefore [Setpoint + LAL]
is equal to [Setpoint - LAL]
MAX-MIN
ALARMS
*if LAL is negative it will be subtracted from the Setpoint
**if HAL is negative it will be subtracted from the Setpoint