Elka ES 80 - Declaration of Conformity - Complete System; Name Plate; Performance Declaration

ES 50 – ES 80
12
4.3 Declaration of conformity – complete system
After the installation an EG-declaration of conformity according to EC-machinery directive 2006/42/EG
for the complete system has to be issued by the person responsible for the integration (according to
product standard DIN EN 13241).
4.4 Name plate
The name plate of the barrier is attached at the inside front of the barrier housing.
4.5 Performance declaration
The performance declaration (pursuant to EC Machinery Directive No. 305/2011) is attached to the
product as a special annex.