- 29 -
CR2032
+
E
N
Battery replacement
You can change the battery without disassembling the device.
CAUTION - only change the battery when the device is disconnected from power supply!!
- the date and time must be reset after changing the battery !!!
- remove the plug-in module with the battery
- replace the original battery
- enter a new battery so that its upper edge (+) lines up with the plug-in module
- slide the plug-in module in the device and pay attention to polarity (+ up) – for roughly 1 s, the display will show the name and the
software version
- you can connect the device to power supply
To Next Page
Loading...
