2)
start to blink. If you want to change
the value, you need to press the
button;
3) repeat the steps 1) and 2) until all
ON values are set;
4) press the button to
exit the
5) . repeat the steps 1) and 2) until all
OFF values are set;
6) press the button to
exit the change function. The time
will be then saved.
:
1
;
2
;
3
;
4
5 .
;
6
..
Max Temp
NO/YES
In this screen you can activate or
deactivate the Critical Temperature
Control function. When the critical
temperature value is (NO), the function
is deactivate.
..
Max Temp
NO/YES
If you want to activate it, you need to:
1) press the button;
2) set the value pressing the
button;
3) press the button to
exit the change function.
:
1
;
2
;
3
.
When you switch the machine on, if
the product temperature is greater
than the one set, the display will blink
and show:
:
Product
T > 4
temperature. In order to stop the
warning signal, please press the
button.
"
.
In this screen you can activate or
deactivate the Cleaning warning
function. This function is used if the
user wants the machine to show a
clear warning on the display that
reminds to clean the machine. If the
Cleaning warning function is on (000d-
---) it is deactivated.
a
d ----)
..
CLEANING
000d - ---
In order to activate it:
1) press the button;
the first value will start to blink. If
you want to change the value, you
need to press the button;
2) press the button again;
3) the second value will start to blink.
If you want to change the value,
you need to press the button;
4) press the button;
5) the third value will start to blink. If
you want to change the value, you
need to press the button;
6) press the button to
exit the change function.
:
1
;
;
2
;
3
;
4
;
5
;
6
. .
When the machine is turned on and
the values (---) are zero, the display
will blink showing the cleaning
warning:
::
CLEANING
REQUIRED
Clean the tank as described in the
usage manual pag. 6;
In order to stop the warning signal,
press the button; thus the
countdown will start again for the next
warning.
000d = time in days for the cleaning
warning to appear
- --- = countdown (day to the
warning)
To Next Page
Loading...
Need help?
General
